High-performance fastening solutions for corrosive and high-temperature environments are offered by Elvis Nickel Alloys, a reputable manufacturer and supplier of premium-quality Inconel 617 Nuts in Houston, USA. Distinguished by their exceptional mechanical strength and resistance to oxidation, our Inconel 617 nuts are perfect for vital uses in the petrochemical, heat treatment, power generation, and aerospace sectors. We provide a large selection of thread types and sizes, all of which are produced in accordance with international and ASTM standards. Elvis Nickel Alloys guarantees dependable performance under even the most demanding operating conditions by emphasising accuracy, prompt delivery, and customised solutions.
Nickel (44.5–60%), chromium (20–24%), cobalt (10–15%), and molybdenum (8–10%) make up the majority of Inconel 617 Nuts. At higher temperatures, this composition provides better resistance to oxidation, carburisation, and creep. The nuts have outstanding mechanical stability up to 1,093°C (2,000°F) and a tensile strength of roughly 690–760 MPa. Additionally, they offer high fatigue and stress rupture strength, particularly in thermally cycling environments. Because Inconel 617 nuts are non-magnetic and maintain their strength and integrity in oxidising and reducing environments, they are perfect for fastening under demanding industrial settings.
Standard ASTM F467, ASTM B564, B166 / ASME SF467, ASME SB564, SB166
Dimensions ANSI B18.2.2, DIN 934,ISO 4032, BS1768, BS 1769
Threads Configuration ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Size M02 to M160
Type Cold Forged, Hot Forged, Bar Stock Machined, Bar Stock Milling
Length 3 mm to 200 mm
| C | Mn | S | Si | Cr | Mo | Ni | Cu | Ti | Al | B | Co | Fe |
| 0.05-0.15 | 1.0 Max | 0.015 Max | 1.0 Max | 20.0-24.0 | 8.0-10.0 | 44.5 Min | 0.5 Max | 0.6 Max | 0.8-1.5 | 0.006 Max | 10.0-15.0 | 3.0 Max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
At Elvis Nickel Alloys, we take pride in being the largest supplier, exporter, and manufacturer of Inconel 617 Nuts in Texas, USA, providing cutting-edge solutions for all your piping needs. Our state-of-the-art production plants are strategically located in the USA, allowing us to maintain a vast inventory of over 16,000 tons of premium-quality materials readily available in stock. We are dedicated to delivering superior products and services, ensuring reliability and excellence for our global clientele.
Contact us to get a quick quote for your requirement.
In aerospace and jet engine assemblies, Inconel 617 nuts are widely used to fasten parts that are subjected to high temperatures and mechanical strain. They are essential for boilers, heat recovery systems, and gas turbines in the production of electricity. They are essential to the petrochemical and chemical processing industries for safe fastening in high-temperature piping, reactors, and furnaces. Additionally, they are used in waste incineration equipment and nuclear energy systems, where heat resistance and corrosion resistance are crucial. Inconel 617 nuts are essential to mission-critical operations because they offer long-term performance and structural reliability in corrosive, high-pressure, and high-temperature environments.
